Nissin Di622 Mark II Bedienerhandbuch PDF herunterladen (Seite 6)

TTL exposure level is accurately calibrated for standard balance in

accordance with Nissin’s standard. If any adjustment is however required,

or if you like to set your preferable level, it can be adjusted for about ±0.75

(3/4) Ev. This adjustment can only be set when the flash is off. Insert 4 AA

batteries in the battery compartment.

Press the pilot lamp and On/Off switch

both together and hold for 3 sec. The

mode select lamp turns light blue color

showing the unit is ready for TTL exposure

level adjustment.

TTL Exposure level custom setting

Light Blue

Ch1 Group A

Press together

Ch1 Group A

Press the power level select button either

+ or - to adjust it to the required exposure

level. Each LED shows 0.25 (1/4) Ev.

increments and it can be adjusted up to

+0.75 (3/4)Ev. (over exposure

efficiency), or down to -0.75 (3/4)Ev.

(under exposure efficiency). Press the

On/Off switch for 3 sec. to turn the unit

off. The adjusted level is memorized and kept as customized default

TTL exposure level. This setting is permanently kept until you alter the

setting to the other required level.

Start to use flash unit from “Turn on the flash unit” at “BASIC

OPERATION” explained as above.

Specifications

Usable cameras

Canon EOS

digital SLR cameras

Nikon iTTL

digital SLR cameras

Guide No.

Illumination

coverage

44/145 at 105mm focal length (ISO 100 m/ft)

24-105mm (16mm with diffuse panel)

(Automatically set for the lens focal length)

Power source

4 x size AA alkaline batteries

(Size AA Ni-MH or lithium batteries usable)

Battery life

200-1500 flashes according to the mode

(with alkaline batteries)

Energy saving

Switch to Stand-by mode in 2 minutes., and power off in

30 minutes. after the power on or the last use of flash unit.

Recycle time 5 seconds with fresh alkaline batteries

Flash exposure

Automatic exposure

E-TTL / E-TTL II

iTTL

Flash

power lock

FE lock

With [FEL] or [ ]

button on EOS cameras

Fv lock

With [AE-L] or [AF-L]

button on the cameras

AF assist light

Effective range of approx. 0.7 to 6m / 2.3 to 20 ft.

Color

temperature

5600 K

Flash duration

1/800 (full power flash) sec.

1/800 - 1/20,000 (controlled flash) sec.

Wirless flash

SD: Slave Digital / SF: Slave Film

(Slave function with 6 power level)

Wireless: for Canon/Nikon-- Wireless remote Channel 1 Group A

for Sony-- Wireless remote Channel 1 Remote (RMT)

(Controlled by Master flash)

*See guide number table as below

Dimensions

77(W) x 130(H) x103(D) mm / 3.0(W) x 5.1(H) x 4.0(D) inches

Weight

315 g / 11 ounces

Install batteries to correct direction.

Trouble Shooting

The flash unit does not start charging.

Batteries are not correctly installed

Mount the flash unit firmly on the camera's hot shoe.

The flash unit does not fire.

The flash unit is not firmly clipped on the camera

Replace the batteries if the recycle time beyond 30 seconds.

Batteries are exhausted

>>>

Use FE or Fv lock.

The flash picture is overexposed or underexposed.

A reflective object or strong lighting near the subject

>>>

Set to TTL mode or other power level.

The unit is set for manual exposure mode

>>>

Turn on the switch again.

The flash unit is automatically powered off

>>>

Guide Numer table

Guide No. at manual exposure mode (ISO 100 in meters / feet)

Flash Power Level

Zooming

Position

24mm

28mm

35mm

50mm

70mm

85mm

105mm

Full 1/2 1/4 1/8 1/16 1/32

25/82

18/58 12.7/42

9/29

6.4/21

4.5/15

28/92

35/115

25/82 18/25

12.7/42

9/29

6.4/21

32/105

22/74 16/51

11/37

7.8/26

5.5/18

38/125

27/88 19/63

13.5/44

9.5/31

6.7/22

41/134

29/95 20/65

14/46

10/33

7/23

44/144

31/102 22/74

16/52

11/37

8/26

20/65 14/46

10/33

7/23

5/16

Warranty

In case of the following reason of the defect, it may void the warranty.

Please refer the respective warranty condition for details which depend

on the country by country.

1. The product is not used in accordance with the instruction of the

owner’s manual.

2. The product is repaired or modified by the one who is not an

authorized repair service.

3. When the product is used with the cameras not applicable, lens,

adaptors or such accessories produced by the third party.

4. Fault or defect cased by fire, earthquake, flood, public pollution

and such natural accident.

5. In case that the product is stored in dust, moisture, extremely high

temperature or such poor condition.

6. Scratch, blemish, crush or worn out by a violently use or treatment.

7. Guarantee card without name of place purchased or date of

purchase stamped, or no guarantee card.

Sony ADI/P-TTL

digital SLR cameras

ADI / P-TTL

N/A

1 2 3 4 5 6

Kommentare zu diesen Handbüchern

Keine Kommentare

Nissin Di622 Mark II Bedienerhandbuch Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamera Blitze Nissin Di622 Mark II